cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
396
Views
0
Helpful
1
Replies

LMS 4.2 Send config to Swiches

rakeshvelagala
Participant
Participant

Hi All,

 

We want to send some standard config commands to all the switches for security audit. Can someone please advise how to send them to the switches?

 

Thanks

 

 

1 Accepted Solution

Accepted Solutions

Ashok Kumar
Cisco Employee
Cisco Employee

Hi,

for this you can use Netconfig feature. Below is the very good guide for the same:

 

Step 1 Select either:

Configuration > Tools > NetConfig > Deploy

Or

Configuration > Job Browsers > NetConfig

The NetConfig Job Browser appears.

Step 2 Click Create.

The Netconfig Job Type page appears, displaying the following job types:

Device Based

Module Based

Port Based

Create a NetConfig Job based on -Devicehttp://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680477

Making and Deploying Configuration Changes Using NetConfig -http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680425

 

Also, there's another feature "Baseline compliance" what you can use to check if the devices  are having the some specific configuration/command & compliant. it'll list the compliant /non-compliant t devices,  with then 1 click you can make them compliant. below is guide for the same: -

Using Baseline Templates to Check Configuration Compliance

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html

 

Creating a Baseline Template

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html#wp1103981

 

 

- Ashok

***************************************************************************************************************

Please rate the post or mark as correct answer as it will help others looking for similar information

***************************************************************************************************************

View solution in original post

1 Reply 1

Ashok Kumar
Cisco Employee
Cisco Employee

Hi,

for this you can use Netconfig feature. Below is the very good guide for the same:

 

Step 1 Select either:

Configuration > Tools > NetConfig > Deploy

Or

Configuration > Job Browsers > NetConfig

The NetConfig Job Browser appears.

Step 2 Click Create.

The Netconfig Job Type page appears, displaying the following job types:

Device Based

Module Based

Port Based

Create a NetConfig Job based on -Devicehttp://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680477

Making and Deploying Configuration Changes Using NetConfig -http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680425

 

Also, there's another feature "Baseline compliance" what you can use to check if the devices  are having the some specific configuration/command & compliant. it'll list the compliant /non-compliant t devices,  with then 1 click you can make them compliant. below is guide for the same: -

Using Baseline Templates to Check Configuration Compliance

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html

 

Creating a Baseline Template

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html#wp1103981

 

 

- Ashok

***************************************************************************************************************

Please rate the post or mark as correct answer as it will help others looking for similar information

***************************************************************************************************************

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers