12-16-2012 09:02 AM
Hi
How to Adjust the time of my LMS 4.2 according to our Domain Controller just for time accurate of the event?
thanks
ibrahim
12-16-2012 09:41 AM
Ibrahim,
Note that events will carry a timestamp from the device that generated them. That is independent of the time on the LMS server. If you want end-end times to be correct, use ntp everywhere.
Like devices, the LMS server itself can be ntp-synchronized.
For LMS on a physical Windows server, it's under the Control Panel - Date and Time setting.
If your Windows server is running as a VM you can use that method or alternatively use VMware tools to synchronize with the ESXi host which is in turn ntp-synchronized.
For LMS as a physical or soft appliance, it is a setting in the base configuration done from the cli, either at setup time of later. Here is the procedure:
For appliance-based systems, the server will need to be rebooted after changing the NTP server.
12-16-2012 10:02 AM
thanks Marvin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide