LMS 4.2 Unresponsive Alarms not clearing on their own
just installed fresh copy of windows 2008 r2 and fresh lms 4.2 and restored from backup 4.0.1. our server had a nic driver problem so all devices reported unresponsive. in 4.0.1 alarms would clear out on their own but now these alarms are not clearing out. please advise on what to check to find out why they are not clearing out on their own.
Event Source DFM
Event Category Reachability
Fault Last Updated At 06-May-2012 13:06:38
fault last updated when the nic driver failed. rebooted the server and everything is working fine now but the fault/alarm/alert is still stuck there.
This is a new product launch - Catalyst 8000 Edge Platforms Family Overview. We will go over the series Catalyst Cellular Gateway in great detail.
Speaker: David Roten, Technical Marketing Engineer at Cisco
David is a Technical Marketing Engineer for...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This event took place on Tuesday 1st, December 2020 at 10hrs PDT
This event provides an introduction to the main Cat9K serviceability features. Serviceability is the pr...
Enhanced Interior Gateway Routing ProtocolEnhanced Interior Gateway Routing Protocol (EIGRP) is an interior gateway protocol suited for many diffrent topologies and media. In a well designed network, EIGRP scales well and provides extremely quick converge...