05-24-2011 01:02 AM
Hallo,
is it possible to disable the Event exceedmaximumuptime only for a specific Interfaces/Device and not for the whole Group ?
regards
Alex
Solved! Go to Solution.
05-30-2011 08:56 AM
When you choose your customizable interface group, add a ruleset that matches the interfaces you want to include. For example, to match an interface called Dialer1 on device rtr1.company.com, you would do:
Intername.Name equals IF-rtr1.company.com/10
This assumes Dialer1 has an ifIndex of 10. The actual name of the interfaces can be found in the Detailed Device View for the devices in question. This is found under Monitor > Fault Settings > Setup > Fault Device Details. Use the Element Name column as the name.
05-28-2011 03:33 PM
Yes, but you have to customize a new customizable interface group to match the interfaces for which you want to disable this event (under Inventory > Group Management > Fault). Then, under Monitor > Fault > Setup, and just your group priorities such that your customized group is first. Adjust any threshold settings you want for this group (making sure Maximum Uptime is not enabled). Finally, apply your changes.
05-30-2011 03:26 AM
ok, but i dont understand how to customize this group that only for one Interface on a Device this Threshold is disabled,
and for all others its enabled ?
05-30-2011 08:56 AM
When you choose your customizable interface group, add a ruleset that matches the interfaces you want to include. For example, to match an interface called Dialer1 on device rtr1.company.com, you would do:
Intername.Name equals IF-rtr1.company.com/10
This assumes Dialer1 has an ifIndex of 10. The actual name of the interfaces can be found in the Detailed Device View for the devices in question. This is found under Monitor > Fault Settings > Setup > Fault Device Details. Use the Element Name column as the name.
05-31-2011 12:34 AM
now i have it :-)
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide