LMS4.0.1 compliance template for ports that are not uplinks
I am attempting to create a compliance template to remove link-status snmp traps and link-status logging for any switch ports that are not connected to another switch or router. Finding a way to identify the uplink ports in the template has me stumped. Depending on the device, the uplink may be a trunk or an access port, so applying the change to all access ports is not an option.
Does anybody have suggestions for syntax to accomplish this? Or perhaps an alternate method to deploy this change to all ports that meet the appropriate criteria? All suggestions are appreciated.
Currently when changing the Authentication Template under the Onboarding section, there is no choice but to remove SGTs, VNs and IP Pools which clearly disrupt existing services.
Hitless Authentication was introduced in...
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 220.127.116.11 as the RP for these groups:18.104.22.168/3222.214.171.124/32126.96.36.199/24188.8.131.52/16 R2 - "advertising" its loopback0 int...
hi,i just performed an IOS upgrade and got a report that admin can't create L2 VLANs.i noticed the 'vtp primary force' and 'vtp primary mst' was applied to one of the core switch and perhaps got lost after the upgrade.how to keep the VTP primary persisten...