One of our locations is moving to a new building. In the new building we will be going from a T1 line to a 10Mbps circuit.
What Module will we need to swap out the existing NIM-1MFT-T1/E1 with to be compatible with the 10Mbps Ethernet circuit?
We will continue using BGP with the new Ethernet circuit.
The ISR Router:
NAME: "Chassis", DESCR: "Cisco ISR4321 Chassis"
PID: ISR4321/K9 , VID: V04 , SN: xxxxxxxxx
Solved! Go to Solution.