cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

83
Views
0
Helpful
0
Replies
Highlighted

MRP is not supported on this interface GigabitEthernet1/26

Hi,

 

Trying to create a Ring with a mix of IE4000s and IE4010s. I am using the guide by Cisco on MRP:

 

Cisco Redundancy Protocol GUIDE

 

I am following the step-by-step instructions to configure mrp, and the IE4000s work like a charm as mrp clients or managers.

 

I tried following the same steps for IE4010s, but they don't like it. I keep getting this error:

 

"MRP is not supported on this interface GigabitEthernet1/26"

 

I have disabled profinet mrp and even profinet itself, but nothing. 

 

Strangely, I tried to use one of the copper ports on the 4010s for the mrp (i.e. gi1/1), and mrp client on the 4010 works fine. It is only if I try using one of the SFPs that the switch does not like it. 

 

I am using the same SFP model for the IE4000s, and they work just fine. Do I need to configure something special for the SFP ports for MRP to work on the IE4010s?

 

Or a specific guide for IE4010 configuration? 

 

Thanks!

 

Jorge M.

 

Everyone's tags (4)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards