Multiple VPN connections to Sandbox (CUCM 11.5)

[crreed]

Hi guys,

I'm trying to run some tests with a CUCM 11.5 sandbox and some generic SIP clients, but since I can only run AnyConnect on a single PC, it's difficult to test with multiple endpoints.  I've tried using internet connection sharing, but this doesn't seem to work.   Is there any way to configure a sandbox instance for more than one inbound VPN connection?

Even better than that would be the ability to setup AnyConnect from a hardware router, but from what I've read this is still in the pipeline.  Would it be possible to setup an open source VPN server of some kind on the Windows Server VM within the CUCM sandbox so I can do this anyway, or will I be blocked by the sandbox routing somehow?

Thanks in advance :)

[Dennis Mink]

can you set up a Site to sote vpn to your sandbox environment?  where is the sandbox? cloud service?

[crreed]

Hi Dennis,

It's a Cisco DevNet server, it's definitely in the cloud.

I did just try setting up a SoftEther site to site VPN but, as I kind of expected, something in the routing (which I obviously can't access) is blocking the VPN from going through.

I'm hoping there is some way to just add an additional user to the existing AnyConnect VPN server so I can connect with a second client without trying to navigate the firewall with a third party VPN service

[rscrash69]

Did you resolve this? According to this post you can add users during sandbox setup. I have not had success getting VPN creds to the second user. 

https://community.cisco.com/t5/devnet-sandbox/how-to-add-users-vpns-to-a-sandbox/td-p/3522268