NAM installation in 7600 router

[ashish_gupta_ashish]

Hi,

I've installed a NAM module ( WS-SVC-NAM-2)in 7600 router with Sup 720. After installation I 've also configured IP address, ip gateway & ip broadcast in NAM module.

But I'm unable to ping router's IP address from NAM module & vice-versa. Sh tech of NAM is also enclosed with this message.

[Joe Clarke]

Post the show tech from the switch.

[mark.cronin]

Which slot is the NAM in?

Which VLAN have you assigned to the NAM?

Is that VLAN up up

if not

enter this on the Supervisor

Conf t

analysis module (slot) management-port access-vlan (vlan)

on the NAM

ip http server enable

ip http secure server enable