I am wondering if someone could be so kind as to help me understand the way I should correctly implement this requirement in Ciscoworks Prime.
I have a large network with a number of different vlan interfaces and interface IDs some of which have Ip helper addresses defined. I am trying to automate the process of changing the IP helper address on the interfaces that have an existing value. Unfortunately I am a bit lost on how to define a template in prime.
Basically what I am trying to do is search for a particular string in the config example ip helper address 18.104.22.168 and change it to a new value if found.
I would greatly appreciate some guidance or sample template with regards to the above
Hi dred, attached a document that I have using basic template configuration, which shows you how to configure/change an specific parameter for a remote device using LMS (it also applies to device groups). I suggest you to give a try in just one device. hope this helps.
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...
LISP Protocol (Location Identifier Separation Protocol)! - The LISP protocol has become a brilliant stardom with the digital transformation that we are now experiencing. - Today we will talk about the LISP protocol and its advantages and method of p...