#It's surprising to me that it's even possible to configure both directions on a single interface.
#It's generally not a good idea to configure both directions among interfaces on a single router.
--> It is possible. ;-) I need QoS (DSCP information) for ingoing traffic and
--> and for outgoing traffic of this interface FastEthernet0/0/0.
#How's g0/0 configured "ip flow" wise?
--> There's no netfow configuration on this interface, only on Fa0/0/0.
-->#sh ip flow interface
--> FastEthernet0/0/0
--> ip flow ingress
--> ip flow egress
#Maybe you're seeing "only outgoing traffic" on
#interface GigabitEthernet0/0, because those are incoming traffic through fa0/0/0
#(where IOS ignores the "ip flow egress" part) and flowing out through g0/0?
--> You're right. The outgoing traffic at Gi0/0 is the ingoing traffic at Fa0/0/0.
--> But I don't think thath the configuration is wrong and I think that the
--> "ip flow egress" command on an single interface is not so special.
--> I really looks like that the command "ip flow egress" on interface Fa0/0/0
--> is being ignored. But why?
--> May be I should start an other discussion with a link to this posting in the
--> router forum.
