Hello,
im getting the error "The monitor does not have a valid record" as per the below when trying to assign my flow monitor to an interface. is anyone Able to shed any light? from what ive researched I cant see any issue with it
Thanks
config:
STR-LAB-01-RTR-01(config-flow-record)#do sh run | s Sola
flow record FR_Solarwinds
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
match interface input
collect interface output
collect counter bytes
collect counter packets
collect timestamp sys-uptime first
collect timestamp sys-uptime last
collect application name
flow exporter FE_Solarwinds
destination 10.66.56.91
source Vlan5
transport udp 2055
option interface-table
option application-table
flow exporter FW_Solarwinds
flow monitor FM_Solarwinds
exporter FE_Solarwinds
cache timeout inactive 10
statistics packet protocol
statistics packet size
STR-LAB-01-RTR-01(config-flow-record)#int vlan 5
STR-LAB-01-RTR-01(config-if)#ip flo
STR-LAB-01-RTR-01(config-if)#ip flow mon
STR-LAB-01-RTR-01(config-if)#ip flow monitor FM_Solarwinds in
STR-LAB-01-RTR-01(config-if)#ip flow monitor FM_Solarwinds input
% Flow Monitor: Failed to add monitor to interface: The monitor does not have a valid record
STR-LAB-01-RTR-01(config-if)#
