The Cisco feature navigator shows ME3800 with IOS 15.xx supports NetFlow export but configuration guide for the device does not show any NetFlow commands. Check the below link for the feature navigator:
I dont see ME3800X in the above list and so I selected ME3800 from the platform list.
Just to try, Can you use the below commands and check how it goes:
ip flow-export version 5
ip flow-cache timeout active 1
ip flow-cache timeout inactive 15
And also, enable NetFlow on all your L3 interfaces. NetFlow v1 is not used anymore and the reason to change active flow timeout is because all your network conversations may be long lived ones and thus will ge exported only after they expire.
If it still does not work, I suggest asking Cisco TAC if NetFlow is supported on the device.
This is a new product launch - Catalyst 8000 Edge Platforms Family Overview. We will go over the series Catalyst Cellular Gateway in great detail.
Speaker: David Roten, Technical Marketing Engineer at Cisco
David is a Technical Marketing Engineer for...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This event took place on Tuesday 1st, December 2020 at 10hrs PDT
This event provides an introduction to the main Cat9K serviceability features. Serviceability is the pr...
Enhanced Interior Gateway Routing ProtocolEnhanced Interior Gateway Routing Protocol (EIGRP) is an interior gateway protocol suited for many diffrent topologies and media. In a well designed network, EIGRP scales well and provides extremely quick converge...