cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

151
Views
0
Helpful
5
Replies
Beginner

New-LH-SFP Error logs

Dear Team,

 

We have received genuine Cisco SFP and below are list of serial numbers:
 
50 Qty of GLC-LH-SMD
    
FNS19240UEM
  FNS19240UDQ
FNS19240U99  FNS19240UD9
FNS19240UFV  FNS19240UDD
FNS19240UG0  FNS19240U8S
FNS19240UE7  FNS19240UD5
FNS19240UE0  FNS19240UA2
FNS19240UE1  FNS19240UAG
FNS19240UEB  FNS19240UFN
FNS19240UE4  FNS19240UEU
FNS19240UFR  FNS19240UEZ
FNS19240UF8  FNS19240UBF
FNS19240UDR  FNS19240UEQ
FNS19240UCN  FNS19240U8B
FNS19240U8J  FNS19240U87
FNS19240UE9  FNS19240UAD
FNS19240UDV  FNS19240U8V
FNS19240UCS  FNS19240UF5
FNS19240U90  FNS19240UCK
FNS19240UAX  FNS19240UCU
FNS19240UDT  FNS19240UD0
FNS19240U9E  FNS19240UDH
FNS19240UFG  FNS19240U9Z
FNS19240UAT  FNS19240U9S
FNS19240UBK   
FNS19240UCB   
FNS19240UAM   
FNS19240UBL   
 
 

While getting them in Plugged in to our cisco equipments. We are receiving below errors:

 
on Switch
 

00:40:04: %PHY-4-CHECK_SUM_FAILED: SFP EEPROM data check sum failed for SFP interface Gi0/23

on Router with XE IOS
 

 

*Oct  8 10:08:10.888: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:08:10.888: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:08:10.888: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:09:11.894: %TRANSCEIVER-6-REMOVED: R0/0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:09:11.894: %TRANSCEIVER-6-REMOVED: F0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:09:11.894: %TRANSCEIVER-6-REMOVED: SIP0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:10:04.905: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:10:04.905: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:10:04.905: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:11:31.855: %TRANSCEIVER-6-REMOVED: R0/0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:11:31.855: %TRANSCEIVER-6-REMOVED: SIP0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:11:31.855: %TRANSCEIVER-6-REMOVED: F0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct  8 10:11:36.837: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:11:36.837: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:11:36.837: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct  8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct  8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

 



Please let us know what is the fault. Is it with the SFPs or do we need to enable any feature on our equipment?

 

Waiting for your reply ASAP.

 

Thank you and Best regard

 

Rebu Cherian Idicheria

5 REPLIES 5
Hall of Fame Community Legend

Re: New-LH-SFP Error logs

What firmware are the router and switch running on?
Beginner

Re: New-LH-SFP Error logs

ASR 1002

 

#sh version | include .bin

System image file is "bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin"

 

ISR 4221/K9

 

site-A#sh version | include .bin

System image file is "bootflash:isr4200-universalk9_ias.16.12.01a.SPA.bin"

 

Highlighted
Hall of Fame Community Legend

Re: New-LH-SFP Error logs

Upgrade the IOS of the ASR first. 3.6.0 is not really a "stable" version.
Beginner

Re: New-LH-SFP Error logs

Ok, I understand we need to change the IOS for the ASR 1002, but what about the ISR 4221, it is the latest version.

 

also the switch version as below:

 

Switch
 
 

sh version | include .bin

System image file is "flash:/c2960-lanbasek9-mz.122-25.SEE2.bin"

 

Hall of Fame Community Legend

Re: New-LH-SFP Error logs

I'm not concerned about the 4221.
2960 IOS is old and unreliable. Upgrade to something more recent, like the latest 15.0(2)SE train.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards