I would like to know is it possible to setup netflow without an exporter on a nexus 5000, since there will be no collector. The netflow monitor to be used only for top talkers, for on the fly diagnostic on who is consuming the bandwidth of a specific interface at that exact time of troubleshooting. if so what would be the setup commands and gather commands.
Software BIOS: version 3.6.0 loader: version N/A kickstart: version 7.0(5)N1(1) system: version 7.0(5)N1(1) Power Sequencer Firmware: Module 1: version v5.0 Module 3: version v2.0 Microcontroller Firmware: version v188.8.131.52 QSFP uC: Module not detected BIOS compile time: 05/09/2012 kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.5.N1.1.bin kickstart compile time: 10/29/2014 22:00:00 [10/30/2014 00:30:37] system image file is: bootflash:///n5000-uk184.108.40.206.N1.1.bin system compile time: 10/29/2014 22:00:00 [10/30/2014 05:45:59]
Hardware cisco Nexus5548 Chassis ("Modular Supervisor") Intel(R) Xeon(R) CPU with 4112812 kB of memory.
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...
LISP Protocol (Location Identifier Separation Protocol)! - The LISP protocol has become a brilliant stardom with the digital transformation that we are now experiencing. - Today we will talk about the LISP protocol and its advantages and method of p...