05-14-2021 12:51 PM
we have a Nexus C93180YC-FX Switch, when I ssh to it, I directly get Privileged EXEC mode #, didn't see User EXEC mode ">".
there is no AAA, and I enabled secret.
who can help me with this issue ?
thanks.
05-14-2021 01:51 PM
check you have VTY Line config - "privilege level 15" or post the config to understand.,
05-14-2021 05:05 PM
thank you for your reply, but there is no option under line vty for privilege 15.
05-15-2021 09:54 AM - edited 05-15-2021 09:57 AM
post the configuration to understand what is wrong?
or check the reference :
05-16-2021 11:24 AM
thanks.
05-18-2021 11:09 AM
Here are related configuration please take a look on it. thanks.
show run
!Command: show running-config
!Running configuration last done at: Sun May 16 18:33:05 2021
!Time: Tue May 18 18:02:39 2021
version 9.3(3) Bios:version 05.42
install feature-set mpls
vdc G-1_5 id 1
allow feature-set mpls
limit-resource vlan minimum 16 maximum 4094
limit-resource vrf minimum 2 maximum 4096
limit-resource port-channel minimum 0 maximum 511
limit-resource u4route-mem minimum 248 maximum 248
limit-resource u6route-mem minimum 96 maximum 96
limit-resource m4route-mem minimum 58 maximum 58
limit-resource m6route-mem minimum 8 maximum 8
feature-set mpls
feature privilege
feature vrrp
cfs eth distribute
feature bgp
feature mpls l3vpn
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
feature nat
username neess password 5 xxxxx role neess
username netadmin passphrase lifetime 99999 warntime 14 gracetime 3
ssh key rsa 2048
enable secret 5 xxxxxxx
ip domain-lookup
crypto key generate rsa label GRPD-MDF_N9K-C93180-1_5 modulus 2048
system default switchport
copp profile strict
snmp-server user admin ne auth md5 0xce956d8801c9f424dd923c29893eaf39 priv 0xce956d8801c9f424dd923
c29893eaf39 localizedkey
snmp-server user ns ne auth md5 0xce956d8801c9f424dd923c29893eaf39 priv 0xce956d8801c9f424dd
923c29893eaf39 localizedkey
rmon event 1 description FATAL(1) owner PMON@FATAL
rmon event 2 description CRITICAL(2) owner PMON@CRITICAL
rmon event 3 description ERROR(3) owner PMON@ERROR
rmon event 4 description WARNING(4) owner PMON@WARNING
rmon event 5 description INFORMATION(5) owner PMON@INFO
line console
line vty
boot nxos bootflash:/nxos.9.3.3.bin
no system default switchport shutdown
05-27-2021 12:52 PM
who can help here?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: