cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1929
Views
0
Helpful
6
Replies

Nexus switch not asking enable password,

Robin.Wang2020
Level 1
Level 1

we have a Nexus C93180YC-FX Switch, when I ssh to it, I directly get Privileged EXEC mode #, didn't see User EXEC mode ">". 

there is no AAA, and I enabled secret. 

 

who can help me with this issue ?

 

thanks. 

6 Replies 6

balaji.bandi
Hall of Fame
Hall of Fame

check you have VTY Line config - "privilege level 15"  or post the config to understand.,

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Robin.Wang2020
Level 1
Level 1

thank you for your reply, but there is no option under line vty for privilege 15. 

post the configuration to understand what is wrong? 

 

or check the reference :

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/command/reference/security/n5k-sec-cr/n5k-sec_cmds_e.html

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

thanks. 

 

Robin.Wang2020
Level 1
Level 1

Here are related configuration please take a look on it. thanks. 

show run

!Command: show running-config

!Running configuration last done at: Sun May 16 18:33:05 2021

!Time: Tue May 18 18:02:39 2021

 

version 9.3(3) Bios:version 05.42

install feature-set mpls

vdc G-1_5 id 1

  allow feature-set mpls

  limit-resource vlan minimum 16 maximum 4094

  limit-resource vrf minimum 2 maximum 4096

  limit-resource port-channel minimum 0 maximum 511

  limit-resource u4route-mem minimum 248 maximum 248

  limit-resource u6route-mem minimum 96 maximum 96

  limit-resource m4route-mem minimum 58 maximum 58

  limit-resource m6route-mem minimum 8 maximum 8

feature-set mpls

 

feature privilege

feature vrrp

cfs eth distribute

feature bgp

feature mpls l3vpn

feature interface-vlan

feature lacp

feature vpc

feature lldp

feature vtp

feature nat

username neess password 5 xxxxx  role neess

username netadmin passphrase  lifetime 99999 warntime 14 gracetime 3

ssh key rsa 2048

enable secret 5 xxxxxxx

ip domain-lookup

crypto key generate rsa label GRPD-MDF_N9K-C93180-1_5 modulus 2048

system default switchport

copp profile strict

snmp-server user admin ne auth md5 0xce956d8801c9f424dd923c29893eaf39 priv 0xce956d8801c9f424dd923

c29893eaf39 localizedkey

snmp-server user ns ne auth md5 0xce956d8801c9f424dd923c29893eaf39 priv 0xce956d8801c9f424dd

923c29893eaf39 localizedkey

rmon event 1 description FATAL(1) owner PMON@FATAL

rmon event 2 description CRITICAL(2) owner PMON@CRITICAL

rmon event 3 description ERROR(3) owner PMON@ERROR

rmon event 4 description WARNING(4) owner PMON@WARNING

rmon event 5 description INFORMATION(5) owner PMON@INFO

 

 

line console

line vty

boot nxos bootflash:/nxos.9.3.3.bin

no system default switchport shutdown

who can help here?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: