04-03-2018 11:12 PM - edited 03-01-2019 06:30 PM
Hi,
I'm facing a problem with the installation of NIM-SSD on cisco ISR 4330. my NIM-SSD state is out of service after booting state for couple minutes.
i was search the procedure to install it but not found something really technical procedure to install.(HW Installation Guide ISR 4000 Series)
below is the details:
## Show Version ##
Cisco IOS XE Software, Version 16.06.03
Cisco IOS Software [Everest], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Ve rsion 16.6.3, RELEASE SOFTWARE (fc8)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 28-Feb-18 23:54 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
VG-Branch-Unit01 uptime is 18 hours, 4 minutes
Uptime for this control processor is 18 hours, 7 minutes
System returned to ROM by Reload Command
System image file is "bootflash:isr4300-universalk9.16.06.03.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None None None
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 appxk9 Permanent appxk9
uck9 uck9 Permanent uck9
securityk9 securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4331/K9 (1RU) processor with 7940073K/6147K bytes of memory.
Processor board ID FDO2202A15C
3 Gigabit Ethernet interfaces
4 Voice FXO interfaces
2 Voice FXS interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
14659583K bytes of flash memory at bootflash:.
0K bytes of WebUI ODM Files at webui:.
20971520K bytes of SATA hard disk at harddisk:.
Configuration register is 0x2102
## Show inv ##
NAME: "Chassis", DESCR: "Cisco ISR4331 Chassis"
PID: ISR4331/K9 , VID: V04 , SN: FDO2202A15C
NAME: "Power Supply Module 0", DESCR: "250W AC Power Supply for Cisco ISR 4330"
PID: PWR-4330-AC , VID: V02 , SN: PST2150N004
NAME: "Fan Tray", DESCR: "Cisco ISR4330 Fan Assembly"
PID: ACS-4330-FANASSY , VID: , SN:
NAME: "module 0", DESCR: "Cisco ISR4331 Built-In NIM controller"
PID: ISR4331/K9 , VID: , SN:
NAME: "NIM subslot 0/2", DESCR: "NIM-2FXS/4FXOP Voice Analog Module"
PID: NIM-2FXS/4FXOP , VID: V01 , SN: FOC22064TFU
NAME: "PVDM subslot 0/4", DESCR: "PVDM4-32 Voice DSP Module"
PID: PVDM4-32 , VID: V02 , SN: FOC220605N2
NAME: "NIM subslot 0/5", DESCR: "ISR SSD Module"
PID: ISR-SSD , VID: V01 , SN:
NAME: "subslot 0/5 disk0", DESCR: "harddisk"
PID: UBA2RFO200HCE1-FMF-CS , VID: 6.0.A , SN: 11001548475
NAME: "NIM subslot 0/0", DESCR: "Front Panel 3 ports Gigabitethernet Module"
PID: ISR4331-3x1GE , VID: V01 , SN:
NAME: "module 1", DESCR: "Cisco ISR4331 Built-In SM controller"
PID: ISR4331/K9 , VID: , SN:
NAME: "module R0", DESCR: "Cisco ISR4331 Route Processor"
PID: ISR4331/K9 , VID: V04 , SN: FDO21521L6W
NAME: "module F0", DESCR: "Cisco ISR4331 Forwarding Processor"
PID: ISR4331/K9 , VID: , SN:
## Show Platform ##
Chassis type: ISR4331/K9
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ISR4331/K9 ok 18:08:38
0/0 ISR4331-3x1GE ok 18:05:48
0/1 NIM-SSD out of service 00:11:54
0/2 NIM-2FXS/4FXOP ok 18:05:08
0/4 PVDM4-32 ok 18:05:08
0/5 ISR-SSD ok 18:06:17
1 ISR4331/K9 ok 18:08:38
R0 ISR4331/K9 ok, active 18:08:38
F0 ISR4331/K9 ok, active 18:08:38
P0 PWR-4330-AC ok 18:08:08
P2 ACS-4330-FANASSY ok 18:08:08
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 17100927 16.7(3r)
1 17100927 16.7(3r)
R0 17100927 16.7(3r)
F0 17100927 16.7(3r)
## Show hw-module subslot 0/1 oir ##
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/1 NIM-SSD out of service(failed too many times)
I didn't see any led indicator of NIM-SSD is on.
please let me know if you need more information to help solving this issue.
really appreciate for any help.
05-17-2018 02:55 PM
I have it installed in a router 4351 in slot 0/2 and the status is ok, try changing it from slot in your router, greetings and luck!
r-a.s07452.mx#show platform
Chassis type: ISR4351/K9
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ISR4351/K9 ok 19:43:24
0/0 ISR4351-3x1GE ok 19:41:30
0/1 NIM-2MFT-T1/E1 ok 19:41:30
0/2 NIM-SSD ok 19:41:34
0/4 PVDM4-64 ok 19:41:34
1 ISR4351/K9 ok 19:43:24
2 ISR4351/K9 ok 19:43:24
R0 ISR4351/K9 ok, active 19:43:24
F0 ISR4351/K9 ok, active 19:43:24
P0 PWR-4450-AC ok 19:43:00
P2 ACS-4450-FANASSY ok 19:43:00
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 15030325 16.7(2r)
1 15030325 16.7(2r)
2 15030325 16.7(2r)
R0 15030325 16.7(2r)
F0 15030325 16.7(2r)
r-a.s07452.mx#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide