cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1098
Views
0
Helpful
1
Replies

NIM-VAB-M fw upgrade to nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

SAMEHELSAMMAK
Level 1
Level 1

dear all

 

i have the nim-vab-m on isr4331

os : isr4300-universalk9.17.06.01a.SPA.bin

 

i need to upgrade the fw for the nim to this version : nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

 

the current version is

show platform software subslot 0/1 module firmware
Avg Load info
-------------------------------------------
1.01 0.94 0.59 1/45 623

Kernel distribution info
-------------------------------------------
Linux version 3.4.11-rt19 (ragvasud@bgl-ads-4785) (gcc version 4.6.2 (Buildroot 2011.11) ) #3 SMP PREEMPT Wed Apr 7 18:26:28 IST 2021

Module firmware versions
-------------------------------------------
Modem Fw Version: 4.14L.04
Modem Phy Version: A2pv6F039t.d26d

Boot Loader: Secondry
-------------------------------------------
Version: 1.1

Modem Up time
-------------------------------------------
0D 0H 12M 43S

 

i added the fe file to boot flas then added it under cont vdsl 0/1/0

firmware phy filename bootflash:/nimfw/nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

 

but still it doesnt use it

 

and when i tried to install it with this command : 

request platform software package install rp 0 file bootflash:/nimfw/nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

 

i get failed 

--- Starting install local lock acquisition on R0 ---
Finished install local lock acquisition on R0

--- Starting local lock acquisition on R0 ---
Finished local lock acquisition on R0

--- Starting file path checking ---

Sep 15 22:19:49 CAIRO: %INSTALL-5-OPERATION_START_INFO: R0/0: provision: Started install package bootflash:/nimfw/nim_vab_phy_fw_A39t_B39g1_Bond39t.pkgFAILED: File bootflash:nimfw/nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg is corrupt or is not a valid package.

 

i got the file from cisco download in isr4331 added it through http interface and by tftp still the same result

 

what am i doing wrong ?

 

please help

 

sh cont vdsl 0/1/0
Controller VDSL 0/1/0 is UP

Daemon Status: UP

XTU-R (DS) XTU-C (US)
Chip Vendor ID: 'BDCM' 'BDCM'
Chip Vendor Specific: 0x0000 0xC01C
Chip Vendor Country: 0xB500 0xB500
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x4602 0x0000
Modem Vendor Country: 0xB500 0x0000
Serial Number Near: FOC23158T2F 4331/K9 17.6.1a
Serial Number Far:
Modem Version Near: 17.6.1a
Modem Version Far: 0xc01c

Modem Status: TC Sync (Showtime!)
DSL Config Mode: AUTO
Trained Mode: G.993.2 (VDSL2) Profile 17a

TC Mode: PTM
Selftest Result: 0x00
DELT configuration: disabled
DELT state: not running

Failed full inits: 0
Short inits: 0
Failed short inits: 0

Modem FW Version: 4.14L.04
Modem PHY Version: A2pv6F039t.d26d
Modem PHY Source: bootflash:
Modem PHY FW Pkg: /nimfw/nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

1 Reply 1

marce1000
VIP
VIP

 

 -          Verify the md5sum of the package you are trying to install

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !