cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Community Live
3309
Views
5
Helpful
4
Replies
sergio.ortega1
Beginner

OID's ASR-920-12CZ-A

Hi,
this is my first post and I can not explain it right , my English is not very good.

I want to monitor the power supply and fans in an ASR- 920-12CZ -A using SNMP OID 's but I have found are not compatible with this model.
Can anyone help me with this issue? Does anyone know which OID should I use to known if the source / fan are OK ?

Thank you

OID fan: 1.3.6.1.4.1.9.9.13.1.4.1.3 (not compatible with cisco ASR-920-12CZ-A)

OID Power Supply: 1.3.6.1.4.1.9.9.13.1.5.1.3 (not compatible with cisco ASR-920-12CZ-A)

1 ACCEPTED SOLUTION

Accepted Solutions

Yep, your OIDs are from CISCO-ENVMON-MIB and it isn't supported by Cisco ASR 920. You can check mib compability here - http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=4407&PlatformSel=247&fsSel=300

And I think you should use this MIB - http://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-ENTITY-FRU-CONTROL-MIB

It looks like it has info about power supplies and fans state.

View solution in original post

4 REPLIES 4

Yep, your OIDs are from CISCO-ENVMON-MIB and it isn't supported by Cisco ASR 920. You can check mib compability here - http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=4407&PlatformSel=247&fsSel=300

And I think you should use this MIB - http://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-ENTITY-FRU-CONTROL-MIB

It looks like it has info about power supplies and fans state.

View solution in original post

Hi Alexey,

thanks for your answer. For power supplies I used the oid 1.3.6.1.4.1.9.9.117.1.1.2.1.2; cefcFRUPowerOperStatus;mib CISCO-ENTITY-FRU-CONTROL-MIB.

for now , I have not found the OID for the status of the fans . I'll keep looking.

thanks

Hi , for me this oid 

OID

.1.3.6.1.4.1.9.9.117.1.4.1

Gave me results, you can try!

 

Regards

Hi Sergio , 

 

I used the OID 1.3.6.1.4.1.9.9.117.1.1.2.1.2 for power supply and get the Power status . 

 

Please help to find out the OID for Fan status on ASR920 platform .