cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
442
Views
0
Helpful
0
Replies
ScottDawson2051
Beginner

OSPF redistribute into BGP (PacketTracer)

Hi All,

 

Am trying to model redistributing OSPF into BGP using Packet Tracer but am not having any luck , wondering if anyone can help me sort out what I'm doing wrong ?

I have OSPF between a switch and router and then BGP between that router and another router. I have other devices connected as am using this to for a real world issue investigation

Switch A

router ospf 20

router-id 192.168.2.1

log-adjacency-changes

network 10.50.100.0 0.0.0.255 area 2

network 10.10.20.0 0.0.0.3 area 2

network 192.168.2.1 0.0.0.0 area 2

 

Router A

router ospf 20

router-id 192.168.1.1

log-adjacency-changes

network 172.31.1.0 0.0.0.255 area 0

network 192.168.1.1 0.0.0.0 area 0

network 10.10.20.0 0.0.0.3 area 2

network 10.10.20.4 0.0.0.3 area 2

!

router bgp 64530

bgp log-neighbor-changes

no synchronization

neighbor 172.31.1.5 remote-as 64520

network 192.168.1.1 mask 255.255.255.255

network 172.31.1.0 mask 255.255.255.0

redistribute ospf 20 match internal external 1 external 2

redistribute connected

 

Router E

router ospf 11

router-id 192.168.1.5

log-adjacency-changes

network 192.168.1.5 0.0.0.0 area 11

network 10.11.10.0 0.0.0.255 area 11

!

router bgp 64520

bgp log-neighbor-changes

no synchronization

neighbor 172.31.1.1 remote-as 64530

network 192.168.1.5 mask 255.255.255.255

network 172.31.1.0 mask 255.255.255.0

redistribute ospf 11 match internal external 1 external 2

redistribute connected

 

"sh ip route bgp" from both Router A & E has no entries.

0 REPLIES 0