cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
392
Views
0
Helpful
0
Replies
YJJcoolcool
Beginner

Packet Tracer having slow performance, suspect STP and HSRP problems

I'm trying to connect to the WLC controller configuration from PC10. The IP addressing information is all correct and I can ping the WLC, but when I try to connect to it via the web browser (HTTP as the WLC is not configured yet), it just shows a blank screen.

I also noticed that the status lights on the switches keep flashing at a very fast rate, and the time counter (in the bottom left of the screen) ticks up very slowly.

I checked Simulation mode and I saw that there were many STP and HSRP packets being sent throughout the network, but I don't know how to solve it. So I need help as to how to stop STP and HSRP congesting the network.

I attached the packet tracer in the zip. The password for console is "cisco" and password for enable is "class".

 

0 REPLIES 0