cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
181
Views
0
Helpful
3
Replies
Beginner

Prime infrastructure 3.2 , non-cisco device monitoring

Dears ,
I am trying to add Brocade switches to cisco Prime infrastructure 3.2
I have verified the provided credential for CLI and SNMP and also I can ping form the switch to Prime .
once added and sync , I received "SNMP Connectivity Failed"

please advise

Everyone's tags (1)
3 REPLIES 3
VIP Advisor

Re: Prime infrastructure 3.2 , non-cisco device monitoring

Firstly i would check the model in compatability list.

Seconds, check the SNMP config on broacade side.

 

If you have windows, download snmplwalk and try config broacade IP make sure you have snmpwalk working with snmp credentials, if all working then try same setting on prime.

 

or check the Logs why it failing ?

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: Prime infrastructure 3.2 , non-cisco device monitoring

Thanks for your update 

please check the attached image , confirmed the SNMP credential  is verified

can you please advise how to check the compatibility?

VIP Advisor

Re: Prime infrastructure 3.2 , non-cisco device monitoring

here is compatability matrix to check.

 

https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html

 

 

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad