Prime Update 3.1 to 3.1.7. No space left on device

[j.eduardog]

Hello guys,

After initial setup of prime 3.1 on a physical appliance Gen2, I tried to update to 3.1.7 (PI_3_1_7-1.0.16.ubf) through web using local drive from my laptop and I am getting the following message:

An error occurred while uploading file:

Processing of multipart/form-data request failed. No space left on device

It is an standalone installation for now, the appliance has no internet connectivity, my reference was:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1-7/release/notes/cpi_rn.html#pgfId-186898

Here is the disk usage:

ade # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol
                      3.9G  294M  3.4G   8% /
tmpfs                  32G  1.4G   31G   5% /dev/shm
/dev/mapper/smosvg-altrootvol
                      124M  5.6M  113M   5% /altroot
/dev/sda1             485M   41M  420M   9% /boot
/dev/mapper/smosvg-home
                      124M  5.6M  113M   5% /home
/dev/mapper/smosvg-localdiskvol
                      248G  188M  235G   1% /localdisk
/dev/mapper/smosvg-optvol
                      1.4T   25G  1.3T   2% /opt
/dev/mapper/smosvg-recvol
                      124M  5.6M  113M   5% /recovery
/dev/sda2              97M  5.6M   87M   7% /storedconfig
/dev/mapper/smosvg-storeddatavol
                      9.7G  151M  9.0G   2% /storeddata
/dev/mapper/smosvg-tmpvol
                      2.0G  971M  913M  52% /tmp
/dev/mapper/smosvg-usrvol
                      6.8G  967M  5.5G  15% /usr
/dev/mapper/smosvg-varvol
                      3.9G  212M  3.5G   6% /var

I appreciate any help

[marce1000]

 - Try stopping prime  (ncs stop) ; followed by ncs cleanup ; answer positive to all action-based questions. Reboot afterwards,  The reboot  is advised instead of ncs start.

M.

[j.eduardog]

Hello M.

Thanks for the information, I will try and post the results here, probably next week.

Regards

[j.eduardog]

Is there a way to update through CLI, I would like to have a second try in case the first doesn't work?
Regards

[marce1000]

 No, not  for a ubf based installation.

M.