Hi all.
We have deployed a Cisco NAM-2 on a Catalyst 6500 in the CPD.
We're capturing traffic by monitor-session configured on vlan 200 on NAM's data-port 1 like this:
monitor session 7 source vlan 200 , 403 , 500
monitor session 7 destination intrusion-detection-module 8 data-port 1
monitor session 7 destination analysis-module 9 data-port 1
When we are capturing traffic, we see Vlan 200 traffic twice:
Same result if I configure VLAN-ID 200 in the filter.
Any idea?
Thank you!