cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
968
Views
0
Helpful
2
Replies

"can not connect to aniserver."

r.sagredo
Level 1
Level 1

LMS 4.0

cal yo help me, please?

Cannot connect to ANiserver7.0.png

when we tried to use topology services, we receive the following message:

"can not connect to aniserver."

I hope you can help me.

Thanks!!

2 Replies 2

Joel Monge
Cisco Employee
Cisco Employee

Problem is likely that the hostname is not resolvable from the client machine.  You need to make sure the LMS server hostname and IP address are resolvable from the client.  You can either configure that on DNS or on the hosts file.

beside what Joel said, also the follwing TCP ports must be reachable from client to server:

    TCP 42342

    TCP 43242

for a test, try to telnet to these ports. If this fails, in most cases a firewall or access-list is blocking the connection.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: