Is the Red Hat ENIC driver common to all Cisco UCS VIC adapters? e.g. 1340, 1380, 1385 and 1387?
A customer has 1340 and 1380 adapters, our test environment has 1385 and 1387 adapters. Is the driver the same driver for these adapters or are there different versions of the ENIC driver for each VIC? We want to determine compatibility if testing against the 1385/87 adapters rather than the 1340/80. The driver versions appear to be the same (e.g. 22.214.171.124-738.18), but is it a common driver to all?
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...
Community Live- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Wednesday 11th, December 2019 at 10hrs PDT
Hi alli have 40 spots (40 Ethernet cables for computers coming out from switch) and i want each of these spots to have fix IP which means if i swap the computer the IP of certain spot remain the same.example : at spot 30 i have IP address of 192.168.22.40...
Cisco DNA Center nodes lost network connectivity. Cannot SSH to nodes. Cluster and Enterprise port connected to Cisco Nexus Switches.
Cisco DNA Center kernel logs showing hung queue error messages. "sudo cat /var/log/kern.log"
Cisco Digital Network Architecture Center Modules(Design Module)Wireless Part.In this article, we are going to talk about Cisco Digital Network Architecture Center design Module, Wireless Part.Cisco DNA Center gives us the flexibility and scalability to c...