04-17-2009 07:16 AM
Hi,
I run RME 4.1.1, I have the following error when I try to inventory a MCS 7825 : RICS0001:Internal Error,unable to process the collected data from the device. I attached the IC_Server.log.
regards,
Julien
04-17-2009 09:29 PM
This could be related to CSCsm97530. You should contact TAC to get the patch for RME 4.1.1. Apply it, then remove the CCM from RME, and re-add it.
06-03-2009 12:34 AM
Joe,
My LMS instance is currently out of maintenance contract. Is there another way to get this patch?
Regards,
Julien
06-03-2009 08:23 AM
No, this patch is only available through TAC.
06-16-2009 10:04 AM
I have RME 4.0.6. I did not want to open a TAC case and had seen things about increasing the SNMP timeout. I went into RME and edited the device attributes for the devices I was having problems with. 10 second timeout still failed, but a 30 timeout fixed the issue. hope that helps.
06-17-2009 06:15 AM
Thanks for the information, I will try.
03-10-2010 08:13 AM
I ran into this problem aswell (RICS0001:Internal Error,unable to process the collected data from the device.) when upgrading a 6509E with SUP720 to a later IOS version.
The solution was to remove and then add the device again via CS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide