08-25-2010 05:43 AM
I am getting the following RME inventory collection error on 4 devices. These 4 devices were recently added to the network and were all attached to a new radius server. I have tested AAA to the 4 switches and am confident that radius is working as intended.
The devices are a mix of 2950 and 3550 switches.
Here is the error.
RICS0001:Internal Error,unable to process the collected data from the device.
Thanks in advance.
Solved! Go to Solution.
08-25-2010 10:54 AM
In that case, this is probably CSCsk65355 which should be fixed in 4.1.1. However, 4.1.1 suffers from CSCsm97530. So I would suggest to first upgrade to RME 4.1.1. If you continue to see this, then you can contact TAC and apply patch for CSCsm97530 over 4.1.1.
08-25-2010 10:36 AM
Exactly what version of RME is this?
08-25-2010 10:44 AM
RME 4.1
08-25-2010 10:54 AM
In that case, this is probably CSCsk65355 which should be fixed in 4.1.1. However, 4.1.1 suffers from CSCsm97530. So I would suggest to first upgrade to RME 4.1.1. If you continue to see this, then you can contact TAC and apply patch for CSCsm97530 over 4.1.1.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide