RME : device attribute and SSH

[delahais]

One of my customers uses LMS 2.2. All theses equipment (2950, 3550, 6500) used SSHv1 connection (telnet is disable).

I do not arrive to right fill the "device attribute" :

Do we fill in ? :

- TACAS Username and password

- Local Username and password

- Telnet password.

On my mind, none works. Each time, in "Check device attribut", i get failed, incorrect or no value to test

Thanks for your assistance.

[steve.busby]

On the methods you use that return "failed", please check to ensure the SNMP community strings and vty/enable passwords are correct.

Check via Server Configuration> Diagnostics> Connectivity Tools>management Station to Device that you have connectivity to the device.

If you need further assistance, please provide your OS platform and LMS Component versions and IDU/Patch levels.

[p950mte]

Hi!

You have set read/ read-write community name in the devices? Have you created a specific user account and password in TACACS for LMS, if so, then it should work, add in the TACACS and TACACS Enable field the password you have set in TACAS.

//Mats