We have 4 WAN Connections connected to a TL-R480T. ---- The LAN is connected to a CISCO ASA 5510.
so the connection between internal network and internet is the CiscoASA 5510.
The problem: All printers are set up to use Scan-to-Email feature which they need to have access to the SMTP Server, but sometime they work sometimes they have to try 5-6 times to get it work. obviously its because of the Multiple WAN Connection and SMTP server is only reachable from WAN 1. So whenever they have problem, the packet is going to the wrong WAN.
So All i need is to tell the Cisco router: SEND ALL SMTP TRAFFIC to 192.168.x.x which is WAN1.
Im not sure how to do this. Should i do this? Help please.
there are 400 users using these printers and Im in charge! imagine the pressure!
Join us live on Tuesday, March 9 at 10 am PT (and on demand after) as we take a closer look at the WAN architecture innovations that Cisco has to offer.
We'll take your questions live during the broadcast (and after), so post them below in the comments.
Hello everybody,I am newbies with setting cisco switch.I downloaded Catalyst 2960-X Switch Getting Started Guide but I can't access to Device Manager - Express Setup according to guide.If you follow the instructions and try to keep all LEDs (exc...
To participate in this event, please use the button to ask your questions
Ask questions from Monday, March 8 to Friday, March 19, 2021
All the knowledge of these four experts at your disposal!
Cisco Software-Defined Wide Area Network (SD-WAN) provid...
Community Live- ISR1100X-4G and ISR1100X-6G Platform Overview and Architecture
(Live event - Tuesday, 23 March, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event will have place on Tuesday 23rd, March 2021 at 10:00 hrs PDT&...