We have 4 WAN Connections connected to a TL-R480T. ---- The LAN is connected to a CISCO ASA 5510.
so the connection between internal network and internet is the CiscoASA 5510.
The problem: All printers are set up to use Scan-to-Email feature which they need to have access to the SMTP Server, but sometime they work sometimes they have to try 5-6 times to get it work. obviously its because of the Multiple WAN Connection and SMTP server is only reachable from WAN 1. So whenever they have problem, the packet is going to the wrong WAN.
So All i need is to tell the Cisco router: SEND ALL SMTP TRAFFIC to 192.168.x.x which is WAN1.
Im not sure how to do this. Should i do this? Help please.
there are 400 users using these printers and Im in charge! imagine the pressure!
Meet the Authors Event - Peter Paluch, Co-author of CCIE Routing and Switching v5.0 Official Cert Guide, Volume 1
(Live event – Wednesday, October 30th, 2019 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This will have place on Wednesday 30...
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
Cisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnec...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...