We are attempting to do an Archive Sync from RME in LMS 3.2.
LMS is installed on a Solaris device with multiple VNICs (let's define VNIC1 IP as 188.8.131.52 and VNIC2 IP as 10.0.0.1). The network which has managed devices on it is connected to NIC 2 in the 10.0.0.0 range. We use VNIC 1 to access LMS. There is no routing between 184.108.40.206 and 10.0.0.0.
Now, I understand that when RME attempts to sync a switch, it starts and SSH session into the device and triggers a "copy flash: tftp:" command. This is apparent from the debug logs from RME.
These TFTP based retrievals are failing because RME is setting the TFTP destination to the IP from VNIC 1 (in our case, to 220.127.116.11). Is there any way to force RME to use another IP address for the TFTP destination?