cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2058
Views
5
Helpful
5
Replies

SNMP configuration in Cisco ASA 5525x

Bertran2013
Beginner
Beginner

Snmp server is sending to me the next message: "Community with read/write permission required". Please help me to configure read/write permission into communities.

The firewall is ASA 5525x

Thanks

5 Replies 5

JEFF SPRADLING
Beginner
Beginner

snmp-server community xxxx rw

 

where xxxx = your read/write community name

The firewall don't accept "rw", that is the problem.

Hi,

 

The ASA does not support SNMP write. You cannot configure rw on the ASA. Only read(ro) is supported.

 

Thanks

John
 

**Please rate posts you find helpful**

Thanks for the correction, John.  That actually makes sense from a security standpoint.  

Jerry Paul
Beginner
Beginner

Hi,

 

Firewall do not allow read/write permissions. All you can do is to set password on different shells of firewall.

 

 

Jerry Paul

www.thenetworkhardware.com

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: