SNMP log need Filtering

[ManivannanR3953]

Hi All,

     We have two vendor one who maintain entire network equipment's, Another vendor taking bandwidth part, Our concern is that interface Fa0/1 up/down status alone send via SNMP to Bandwidth vendor's monitoring server, 

    Other information like CPU / Memory usage, configuration, log are not required to send via SNMP to Bandwidth vendor

kindly suggest us how to procced for this.

[marce1000]

 - FYI : https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/13506-snmp-traps.html

 You may want to look at this particular example : (see below-in-frame) , you may just adapt it to your needs , presumably as in 

   snmp-server host vender-snmp-server-addr public linkup linkdown  (exact syntax may vary but easily can be found when listing all traps)

 >...

snmp-server host 10.10.10.10 public config bgp tty 
snmp-server enable traps config 
snmp-server enable traps bgp