I have about 20 switches in my enviornment. for some reason, I can't get interface utilization on Cisco netManager. At one time, I had this running, but someone it doesn't seem to be. Maybe there is something wrong with my config. So, I will use the most important switch, a 3750 as the example.
This is runnning version 12.2 (55) SE4 of the IOS.
This is a common configuration for the switchport:
description UPLINK PORT
switchport trunk encapsulation dot1q
switchport mode trunk
mls qos trust dscp
This is the snmp portion of the config:
snmp-server community bpsnmp RO
snmp-server location springfeild MDF 3750
snmp-server host 192.168.110.34 bpsnmp
This snmp server is Cisco netManager. I have it configured with the right credentials and it's showing that device is up via snmp & icmp.
But for some reason it doesn't want to collect or maintain any interface utilization information. For that matter, it netManager isn't really retaining any data. So, maybe the problem is more on the netManager end. But, I wanted to verify that there isn't anything in particular that I should be putting on the switch.
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...