The only host that I'm allowed to run snmp from is our prime infrastructer server on which I access the shell and I have snmp commands available. I'm able to do snmpget, snmpgetnext, snmpwalk, but when I try to do a snmpset I get some errors and the router will not accept the commands.
I'm running the following command:snmpset -v 3 -u <username> -a MD5 -A <password> -x DES -X <privacy pass phrase> -l authPriv <ip address to router> 18.104.22.168.22.214.171.124.126.96.36.199.1.2.<random number> i 1, but i get this errormessages:
Error in packet.
Failed object: SNMPV2-SMI::enterprises.188.8.131.52.184.108.40.206.15 (my random number is 15)
I'm able to run snmpget, snmpgetnext and snmpwalk without problems.If I do some debugging I can see some errors regarding engine data. Like this:
usm: Failed to find engine data
When doing debugging on the router, i see the following:
Dec 28 15:45:21: SNMP: Packet received via UDP from x.x.x.x on Tunnel99 Dec 28 15:45:21: Incoming SNMP packet Dec 28 15:45:21: v3 packet security model: v3 security level: noauth Dec 28 15:45:21: username: Dec 28 15:45:21: snmpEngineID: 800000090300701F530F701A Dec 28 15:45:21: snmpEngineBoots: 0 snmpEngineTime: 0 Dec 28 15:45:21: SNMP: Report, reqid 1014559499, errstat 0, erridx 0 internet.220.127.116.11.1.4.0 = 10111 Dec 28 15:45:21: SNMP: Packet sent via UDP to x.x.x.x Dec 28 15:45:21: SNMP: Packet received via UDP from x.x.x.x on Tunnel99 Dec 28 15:45:21: SNMP: Set request, reqid 1014559498, errstat 0, erridx 0 ccCopyTable.1.2.15 = 1 Dec 28 15:45:21: Incoming SNMP packet Dec 28 15:45:21: v3 packet security model: v3 security level: priv Dec 28 15:45:21: username: xxxxxxxxx Dec 28 15:45:21: snmpEngineID: 800000090300701F530F701A Dec 28 15:45:21: snmpEngineBoots: 4 snmpEngineTime: 93494 Dec 28 15:45:21: SNMP: Response, reqid 1014559498, errstat 6, erridx 1 ccCopyTable.1.2.15 = 1 Dec 28 15:45:21: SNMP: Packet sent via UDP to x.x.x.x
Meet the Authors Event - Peter Paluch, Co-author of CCIE Routing and Switching v5.0 Official Cert Guide, Volume 1
(Live event – Wednesday, October 30th, 2019 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This will have place on Wednesday 30...
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
Cisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnec...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40
I've got a one problem. Me and my friend have the same ISP. I checked my External IP address at WhatIsMyIp.com and my friend do it to. And we saw we have the same External IP.So my question is can 2 routers have the same External IP address?If i'm right 2...