03-19-2009 04:48 AM
Hello, I am managing a Cisco 2801 router and I want to view some information from a command. For example:
###start code###
router#show ip sla monitor statistics
Round trip time (RTT) Index 1
Latest RTT: 44 ms
Latest operation start time: 12:41:18.244 MET Thu Mar 19 2009
Latest operation return code: OK
RTT Values
Number Of RTT: 500
RTT Min/Avg/Max: 43/44/48 ms
Latency one-way time milliseconds
Number of one-way Samples: 500
Source to Destination one way Min/Avg/Max: 21/22/26 ms
Destination to Source one way Min/Avg/Max: 21/21/22 ms
Jitter time milliseconds
Number of SD Jitter Samples: 499
Number of DS Jitter Samples: 499
Source to Destination Jitter Min/Avg/Max: 0/1/3 ms
Destination to Source Jitter Min/Avg/Max: 0/1/1 ms
Packet Loss Values
Loss Source to Destination: 0 Loss Destination to Source: 0
Out Of Sequence: 0 Tail Drop: 0 Packet Late Arrival: 0
Voice Score Values
Calculated Planning Impairment Factor (ICPIF): 0
Mean Opinion Score (MOS): 0
Number of successes: 12
Number of failures: 0
Operation time to live: Forever
###finish code###
I just want to view theese four lines:
Latency one-way time milliseconds
Number of one-way Samples: 500
Source to Destination one way Min/Avg/Max: 21/22/26 ms
Destination to Source one way Min/Avg/Max: 21/21/22 ms
With "| include something" I can select just one line, but I want to view the four lines.
Is any way to do that?
Thanks for all, regards.
Josu Lazkano.
Solved! Go to Solution.
03-19-2009 05:41 AM
I would say the following should work for you:
sh ip sla monitor statistics | include way
And to do the same with multiple string search:
sh ip sla monitor statistics | include Latency|of one-way|Destination one|Source one
NOTE: no spaces between the '|' and the different search strings
(i tested this with IOS Version 12.2(18)SXF8)
03-19-2009 05:41 AM
I would say the following should work for you:
sh ip sla monitor statistics | include way
And to do the same with multiple string search:
sh ip sla monitor statistics | include Latency|of one-way|Destination one|Source one
NOTE: no spaces between the '|' and the different search strings
(i tested this with IOS Version 12.2(18)SXF8)
03-19-2009 06:21 AM
Thank you very much!
This is exactly what I was looking for.
Thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide