cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
375
Views
0
Helpful
0
Replies
Brent Rockburn
Explorer

ssh issues on my 5548UP

Hey Guys,

I'm trying to configure ssh on my 5548UP and it's not working ..

I've created the rsa key .. I've tried the following command

blahblah1(config)# username bcfadmin sshkey ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCkZ/cQ12PszmV+4opkTkOV01k0oPdyumQDV2ZTISCMhzLxU6AHUWQ2bUdcGcDhH7K4/ImQJ5lyBvO6fMKx0iPPL0yoEWsc

jjKDK8pXeKyMwJ1/+0jlswA1xQFFEFZpbtQc4m1u7FnSk732XpPCBCtYG2GPyt12RrjUFNah2z7I434438A7uvMStgDPzjTkwx7B8xetnFbnnF73/bm8T3ECaFd1U9qUakoe7HmC

m1MATvzC4fYTsYXX4io/P/adfadfJ2jzIp9Noh9qi9mRKFQtExQ+hD9NgFn4hQFPGc4+QztLmJfNpSUKxETxZM7qrcpZ5zJoJ1rooytBUJhQhTrRJSchJ9

I get

% Invalid command at '^' marker.

KDC-S3-01(config)# m1MATvzC4fYTsYXX4io/P/fxFeJ2jzIp9Noh9qi9mRKFQtExQ+hD9NgFn4hQFPGc4+QztLmJfNpSUKxETxZM7qrcpZ5zJoJ1rooytBUJhQhTrRJSchJ9

I've verified server is enabled, I see the feature on ..

am I missing something?

Do I need to have the management interface configured ... I already have a few SVI's created and reachable .. and I can telnet to the box fine.

any help would be great.

Thanks,

BR

0 REPLIES 0
Content for Community-Ad