Stack Cisco Catalyst 3850 Series Switches

[daocongtrung]

Hello. Currently I am choosing Switch 3850 for my system.
Please tell me can I stack 2 devices "3850-48T-S" and cisco "3850-48XS-S" together?
I have read on the forum is possible. But I want to be sure.

[luis_cordova]

Hi @daocongtrung,

Look what I saw in the datasheet of that model:

Table 1.          Cisco Catalyst 3850 Series configurations

Model	Total 10/100/1000 or SFP or SFP+ ports	Default AC power supply	Available PoE power	POE budget with 1100W secondary PS	StackWise-480	StackPower
WS-C3850-24T	24	350WAC	-		Yes	Yes
WS-C3850-48T	48
WS-C3850-24P	24 PoE+	715WAC	435W	1535W
WS-C3850-48XS	48 1/10G SFP+	750WAC (front to back)	-		No	No

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

I hope this information will be useful to you.

Regards

[daocongtrung]

Thanks for your support.

I have read the datasheet again and found that the WS-C3850-24S supports StackWise-480.

So, Can stack Switch 3850-48T-S and WS-C3850-24S right?

[Seb Rupik]

As @luis_cordova points out the 48TS-S supports traditional stackwise contentions.

The 48XS-S supports stackwise virutal and can only be paired with another 48XS-S in this configuration.

As a pair the 48TS and 48XS cannot be stacked together.

cheers,

Seb.

[daocongtrung]

Thanks for your support.

I read the datasheet again and found that both the WS-C3850-24S and the WS-C3850-24S switches support StackWise-480. Can I use these 2 models?

[Seb Rupik]

Yes, any 3850 listed as supporting stackwise-480 can be physically connected via the stacking ports at the back of the switches.

cheers,

Seb.

[Leo Laohoo]

Not possible.
3850-48XS does not have stacking module at the back.

[daocongtrung]

Hi Leo.

Thanks for your support.

Yes I know. And I removed 3850-48XS.
I am talking about WS-C3850-24S and WS-C3850-24S. Both support StackWise-480.

[daocongtrung]

Sorry, I made a mistake because of use copy.

I want to talk about two Switch "3850-48T-S" and "WS-C3850-24S".

I want to know can I stack two switches together.

As Mr. Seb Rupik said. We can stack all Cisco 3850 devices supported stackwise-480

[Leo Laohoo]

3850-48T & 3850-24S can be stacked together.

[daocongtrung]

Dear LOE.

Thanks for your support.