cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4408
Views
0
Helpful
10
Replies

Stack Cisco Catalyst 3850 Series Switches

daocongtrung
Level 1
Level 1


Hello. Currently I am choosing Switch 3850 for my system.
Please tell me can I stack 2 devices "3850-48T-S" and cisco "3850-48XS-S" together?
I have read on the forum is possible. But I want to be sure.

10 Replies 10

luis_cordova
VIP Alumni
VIP Alumni

Hi @daocongtrung,

 

Look what I saw in the datasheet of that model:

 

Table 1.          Cisco Catalyst 3850 Series configurations

Model

Total 10/100/1000 or SFP or SFP+ ports

Default AC power supply

Available PoE power

POE budget with 1100W secondary PS

StackWise-480

StackPower

WS-C3850-24T

24

350WAC

-

 

Yes

Yes

WS-C3850-48T

48

 

WS-C3850-24P

24 PoE+

715WAC

435W

1535W

WS-C3850-48XS

48 1/10G SFP+

750WAC (front to back)

-

 

No

No

 

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

 

I hope this information will be useful to you.

 

Regards

Thanks for your support.

 

I have read the datasheet again and found that the WS-C3850-24S supports StackWise-480.

So, Can stack Switch 3850-48T-S and WS-C3850-24S right?

Seb Rupik
VIP Alumni
VIP Alumni

As @luis_cordova points out the 48TS-S supports traditional stackwise contentions.

 

The 48XS-S supports stackwise virutal and can only be paired with another 48XS-S in this configuration.

 

As a pair the 48TS and 48XS cannot be stacked together.

 

cheers,

Seb.

Thanks for your support.

I read the datasheet again and found that both the WS-C3850-24S and the WS-C3850-24S switches support StackWise-480. Can I use these 2 models?

Yes, any 3850 listed as supporting stackwise-480 can be physically connected via the stacking ports at the back of the switches.

 

cheers,

Seb.

Leo Laohoo
Hall of Fame
Hall of Fame
Not possible.
3850-48XS does not have stacking module at the back.

Hi Leo.

 

Thanks for your support.

Yes I know. And I removed 3850-48XS.
I am talking about WS-C3850-24S and WS-C3850-24S. Both support StackWise-480.

Sorry, I made a mistake because of use copy.

I want to talk about two Switch "3850-48T-S" and "WS-C3850-24S".

I want to know can I stack two switches together.

As Mr. Seb Rupik said. We can stack all Cisco 3850 devices supported stackwise-480

3850-48T & 3850-24S can be stacked together.

Dear LOE.

 

Thanks for your support. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: