03-19-2014 09:58 AM
We have PI2.0 installed and working well. What is the best avenue for viewing syslog current and historical ?
We are currently logging to another platform and use Kiwi & Cygwin to view them.
Solved! Go to Solution.
03-19-2014 10:05 AM
Hi,
PI 2.0 still does not have complete support of syslogs.
AFAIK , Upcoming release of PI will have the complete support of syslogs and you should be able to view all the syslogs from PI.
Thanks-
Afroz
***Ratings Encourages Contributors ***
03-19-2014 10:05 AM
Hi,
PI 2.0 still does not have complete support of syslogs.
AFAIK , Upcoming release of PI will have the complete support of syslogs and you should be able to view all the syslogs from PI.
Thanks-
Afroz
***Ratings Encourages Contributors ***
03-19-2014 12:14 PM
Some of our Customers in CSC has found a tweak to get all syslog sev levels by this :
Syslog is working on PI2.0. by default Prime only accepts the severity 0 and 1. you will need to modify a file in PI 2.0 to allow prime to accept Syslog messages.
change following file
/opt/CSCOlumos/conf/syslog_sev_filter.xml file (Bold lines have been added here):
<expression op='OR'>
<!-- Error -->
<condition field='severity' op='EQUALS' value='0' />
<condition field='severity' op='EQUALS' value='1' />
<condition field='severity' op='EQUALS' value='2' />
<condition field='severity' op='EQUALS' value='3' />
<condition field='severity' op='EQUALS' value='4' />
<condition field='severity' op='EQUALS' value='5' />
<condition field='severity' op='EQUALS' value='6' />
</expression>
**NOTE: THIS IS NOT CISCO TESTED. BUT SEEMS TO BE WORKING FOR MANY.
As per thread :
https://supportforums.cisco.com/discussion/11645481/prime-infrastructure-12-syslog?tstart=0&viewcondensed=
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide