cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
19170
Views
0
Helpful
15
Replies

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Jurgens L
Level 3
Level 3

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.

I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):

gmsncs/admin# dir disk:defaultRepo/

Directory of disk:defaultRepo/

  508376482 Sep 13 2012 05:38:25  backup-20120913-0530.tar.gpg

  853768584 Sep 20 2012 05:40:17  backup-20120920-0530.tar.gpg

     127019 Sep 26 2012 16:40:58  ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz

           Usage for disk: filesystem

                 1544204288 bytes total used

                27185573888 bytes free

                30293413888 bytes available

gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo

Save the current ADE-OS running configuration? (yes/no) [yes] ? yes

Generating configuration...

Saved the ADE-OS running configuration to startup successfully

Initiating Application Patch installation...

% Local file not found

Anybody experience with this procedure.

Thank You

--- Update ---

Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:

gmsncs/admin# dir disk:/defaultRepo

Directory of disk:/defaultRepo

  926193986 Sep 26 2012 17:48:12  GRDbackup-120926-1736.tar.gpg

  508376482 Sep 13 2012 05:38:25  backup-20120913-0530.tar.gpg

  853768584 Sep 20 2012 05:40:17  backup-20120920-0530.tar.gpg

     127019 Sep 26 2012 16:40:58  ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz

           Usage for disk: filesystem

                 2471309312 bytes total used

                26258468864 bytes free

                30293413888 bytes available

gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo

Save the current ADE-OS running configuration? (yes/no) [yes] ? yes

Generating configuration...

Saved the ADE-OS running configuration to startup successfully

Initiating Application Patch installation...

% Manifest file not found in the bundle

gmsncs/admin#

15 Replies 15

Hi Umesh,

Yes I got it to work. My VM host has not enough cpu power so when doing a cold start, the healthmonitor crashes. After a reboot it then works.

I did not yet upgrade to 1.3 but am looking forward to it.

Review Cisco Networking for a $25 gift card