cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1608
Views
5
Helpful
5
Replies

URGENTLY HELP REQUIRED.

mkkhan786
Level 1
Level 1

Dear Friends,

 

our management want to know about 6509 restart cause...any one help me regarding this activity .. 

we have lms 4.0

 

1 Accepted Solution

Accepted Solutions

Last switchover reason = active unit failed

This is the reason.

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the command "sh version".

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXJ2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 14-Dec-11 19:51 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)

 cc-cor-sw-01 uptime is 31 weeks, 5 days, 23 hours, 47 minutes
Uptime for this control processor is 5 hours, 29 minutes
Time since cc-cor-sw-01 switched to active is 5 hours, 5 minutes
System returned to ROM by Stateful Switchover at 14:18:48 UTC Wed Mar 7 2012 (SP
 by power on)
System image file is "sup-bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ2.bin
"
Last reload reason: reload

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of m
emory.
Processor board ID SMC141700NW
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 SSC-400 controller (1 IPSEC).
40 Virtual Ethernet interfaces
116 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

Can you post the output to the command "sh red summary"?

Redundant System Information :
------------------------------
       Available system uptime = 32 weeks, 1 hour, 44 minutes
Switchovers system experienced = 2
              Standby failures = 0
        Last switchover reason = active unit failed

                 Hardware Mode = Simplex
    Configured Redundancy Mode = sso
     Operating Redundancy Mode = sso
              Maintenance Mode = Disabled
                Communications = Down      Reason: Simplex mode

Current Processor Information :
-------------------------------
               Active Location = slot 5
        Current Software state = ACTIVE
       Uptime in current state = 23 hours, 18 minutes
                 Image Version = Cisco IOS Software, s72033_rp Software (s72033_
rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXJ2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 14-Dec-11 19:51 by prod_rel_team
                          BOOT = sup-bootdisk:s72033-advipservicesk9_wan-mz.122-
33.SXJ2.bin,1;
        Configuration register = 0x2102

Peer (slot: unavailable) information is not available because it is in 'DISABLED
' state

Last switchover reason = active unit failed

This is the reason.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco