Using Prime Infrastucture 2.1 to get the DOT1X status of ports
Using Prime Infrastructure 2.1 is it possible to generate a report across multiple switches for the ports that are configured to use dot1x and those that are not? The goal of the report is to identify the percentage of ports currently using dot1x vs those that are "open" ports. I'd prefer the ports that "use" dot1x but are authentication open to be included in the group that is not using dot1x, since they really aren't. It would also be nice if trunk ports and those that are administratively down (shutdown) were not counted in either total.
The sample scenario would see 2 switches, find that that 80 of 94 ports have dot1x, and the 10 ports that are trunks or shutdown are not counted.
Enterprise Routing Business Unit is glad to announce Beta release 16.12.2 for all Routing Platforms such as ASR1K, ISR1K, ISR4K, ISRv, CSR1K Platforms. This release is made available to allow users to test, evaluate and share fee...
Meet the Authors Event - Peter Paluch, Co-author of CCIE Routing and Switching v5.0 Official Cert Guide, Volume 1
(Live event – Wednesday, October 30th, 2019 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This will have place on Wednesday 30...
ENCS 5400 is a purpose built compute platform for branch networking. Multiple VNFs (virtual network functions) can be hosted in the ENCS platform with flexible connectivity options.
There are multiple Layer2 software and hardware entities in a typi...
Cisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnec...
how do we restrict a router interfaces from directly connected to Some vlans? can any one help me to figureout?the question is Router should not have interfaces directly connected to Vlan 30 and Vlan 40