VTP Issues

[daniel_growth]

Hi All,

I have configured VTP on all switches and have set the warmingham switch as server.

When i implement a vlan on the server it will not replicate on other switches which are set to client.

I have attached the packet tracer file. Any passwords are set to 'cisco'

Thanks in advance!

[Mark Elsen]

 - Make sute trunk links are used to all switches who need to receive the intended vlans.

  M.

[daniel_growth]

I tried making the ports switch side all trunk and it still doesnt want to work.

[daniel_growth · Accepted solution]

I found the issue was that VTP is unable to go through routers and must stay within one network amongst local switches.