Solved: VTP Issues

daniel_growth · ‎09-03-2019

Hi All,

I have configured VTP on all switches and have set the warmingham switch as server.

When i implement a vlan on the server it will not replicate on other switches which are set to client.

I have attached the packet tracer file. Any passwords are set to 'cisco'

Thanks in advance!

Kind Regards,
Daniel Growth

daniel_growth · ‎09-04-2019

I found the issue was that VTP is unable to go through routers and must stay within one network amongst local switches.

Kind Regards,
Daniel Growth

View solution in original post

marce1000 · ‎09-03-2019

- Make sute trunk links are used to all switches who need to receive the intended vlans.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

daniel_growth · ‎09-03-2019

I tried making the ports switch side all trunk and it still doesnt want to work.

Kind Regards,
Daniel Growth

daniel_growth · ‎09-04-2019

I found the issue was that VTP is unable to go through routers and must stay within one network amongst local switches.

Kind Regards,
Daniel Growth