cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1555
Views
0
Helpful
5
Replies

Which Prime Infrastructure version is the most running stable

Louis Moreno
Beginner
Beginner

With the new PI release of 3.1, i was wondering if i should upgrade to it or remain on 3.0.xxx.


What would you recommend?

Thanks in advance!

1 Accepted Solution

Accepted Solutions

Your're looking at the major release page.

Go up one level on the software download tree:

https://software.cisco.com/download/type.html?mdfid=286304360&flowid=79748

and look under Prime Infrastructure patches:

https://software.cisco.com/download/release.html?mdfid=286304360&flowid=79748&softwareid=284272933&release=3.1.1&relind=AVAILABLE&rellifecycle=&reltype=latest

You do need to have 3.1 installed prior to the 3.1.1. patch.

View solution in original post

5 Replies 5

Marvin Rhoads
Hall of Fame
Hall of Fame

I've found 3.1 to be much less buggy than 3.0.x.

Even more so now that Device Pack 1 and Patch 1 (3.1.1) are both now out.

Thank you Marvin, i'll take that route as you are suggesting

Marvin it appears that Cisco has not made version 3.1.1 available to their customers, at least I don't see it available, see screenshot below

Your're looking at the major release page.

Go up one level on the software download tree:

https://software.cisco.com/download/type.html?mdfid=286304360&flowid=79748

and look under Prime Infrastructure patches:

https://software.cisco.com/download/release.html?mdfid=286304360&flowid=79748&softwareid=284272933&release=3.1.1&relind=AVAILABLE&rellifecycle=&reltype=latest

You do need to have 3.1 installed prior to the 3.1.1. patch.

Thank you Marvin!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: