12-12-2010 06:57 PM
Hi all,
I'm posting to get why C7613 make a reply so late for snmp query.
SG1_C7613#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE10202Q2L
3 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE10202Q26
5 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE10170R34
6 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE11043ANE
7 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL1018LKHA
8 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL SAL1015JGVR
9 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1140Z3N7
10 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1239W237
11 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE0950RQR8
12 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1245ZPKI
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0017.5ad8.6960 to 0017.5ad8.699f 2.2 12.2(18)IXH1 12.2(18)IXH1 Ok
3 0017.5ad8.4040 to 0017.5ad8.407f 2.2 12.2(18)IXH1 12.2(18)IXH1 Ok
5 0017.5923.cf40 to 0017.5923.cf7f 2.2 12.2(18)IXH1 12.2(18)IXH1 Ok
6 001a.a124.c2d0 to 001a.a124.c30f 2.3 12.2(18)IXH1 12.2(18)IXH1 Ok
7 0013.c43a.e6e4 to 0013.c43a.e6e7 5.2 8.4(2) 12.2(18)IXH1 Ok
8 0017.9441.47f4 to 0017.9441.47f7 5.2 8.4(2) 12.2(18)IXH1 Ok
9 001d.a256.ef60 to 001d.a256.ef9f 2.3 12.2(18)IXH1 12.2(18)IXH1 Ok
10 0024.97dd.4140 to 0024.97dd.417f 2.3 12.2(18)IXH1 12.2(18)IXH1 Ok
11 0015.f9a1.b540 to 0015.f9a1.b57f 2.3 12.2(18)IXH1 12.2(18)IXH1 Ok
12 0024.140e.0b00 to 0024.140e.0b3f 2.3 12.2(18)IXH1 12.2(18)IXH1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1018LJ79 1.8 Ok
7 MSFC3 Daughterboard WS-SUP720 SAL1017LCAT 2.5 Ok
8 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1016KPRB 1.8 Ok
8 MSFC3 Daughterboard WS-SUP720 SAL1016KLLB 2.5 Ok
our C7613 has operated with many FlexWAN and PA(Port Adaptor)s.
also it has many routing table.
ios version : 12.2(18)IXH1
sup : supervisor 720-3BXL
we have used snmp server to monitoring the device(C7613)
it used snmp bulk(max repetition=50) query to get operation information for C7613.
in most case, C7613 reply snmp query from snmp server
but it relpies so late for query of FlexWAN Memory used(cempMemPoolUsed (1.3.6.1.4.1.9.9.221.1.1.1.1.7))
it replies after 5 or 6 seconds.
I can't understand why C7613 reply so late.
C7613 replies promptly for routing table and other query
routing table entries are bigger than cempMemPoolUsed.
C7613 used many resource and computation to get and replied for cempMemPoolUsed?
Solved! Go to Solution.
12-18-2010 03:12 PM
This sounds like CSCsd29469, which is fixed for the 7600 in 12.2(18)SXF7 and 12.2(33)SRA3 and higher.
12-18-2010 03:12 PM
This sounds like CSCsd29469, which is fixed for the 7600 in 12.2(18)SXF7 and 12.2(33)SRA3 and higher.
12-19-2010 09:46 PM
Hi Joseph
Thanks for your comment.
as your saying, It was the bug.
I have confirmed it opening case. it's resolved last week.
Thanks again and hope to have a good time.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide