WLC 5508 - Failed to connect from LMS 3.2

[AYTOIAM2009]

Hello.

I am trying to include a WLC 5508 in our LMS 3.2.

I have defined the device and credentials, but the LMS server cannot get access to it.

If I try to check de device credentials from the Device Center I get a "failed to connect", but if I a try a telnet session, also from Device Center, I get a connection.

I checked the credentails are OK.

Thank you.

[ebezombes]

Hi,

You need to download and install the last package : WLC.RME431.v2-1.zip : http://www.cisco.com/cisco/software/cart.html?imageGuId=E3A42793DA29A1B6AC3024C088F9FBC2B324EC8B&i=rs

You must install : MDF 1.37

You must install packages before WLC.RME431.v2-1.zip:

SharedSwimWLC.RME431.v1-2.zip
SharedDcmaWLC.RME431.v1-1.zip
SharedSwimIOS.RME431.v2-5-4.zip
LibSwim.RME431.v2-5-3.zip
LibCommon.RME431.v2-4-2.zip

Elisabeth

WLC.RME431.v2-1.readme:

Supported Devices
=================

Device Type : Cisco 5500 Series Wireless LAN Controllers
       Cisco 3750 Switch with Wireless LAN Controller

Devices/Modules Supported :
---------------------------
Cisco 5508 Wireless LAN Controller : 1.3.6.1.4.1.9.1.1069

Cisco 3750 24+2 port 10/100/1000 Switch with integrated Cisco 4402 Wireless Controller: 1.3.6.1.4.1.9.1.747

Features Supported:
-------------------
Inventory Manager : Yes
Syslog Analyzer : Yes
Config.Mgmt  : Yes
Software Mgmt : Yes

Minimum Software : 6.0.188.0

Hardware and Software Requirements
==================================

Hardware and software requirements are the same as those needed for Resource Manager
Essentials 4.3.1 installation.

You must install Resource Manager Essentials 4.3.1 and MDF 1.37 before installing the
device package.

For a detailed list of requirements, as well as instructions for installing Resource
Manager Essentials 4.3.1, go to Cisco.com.

For documentation on Resource Manager Essentials, see:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/tsd_products_support_series_home.html

Package Dependencies
====================

To install the WLC Package, you must install the
following dependent packages:

SharedSwimWLC.RME431.v1-2.zip
SharedDcmaWLC.RME431.v1-1.zip
SharedSwimIOS.RME431.v2-5-4.zip
LibSwim.RME431.v2-5-3.zip
LibCommon.RME431.v2-4-2.zip

[AYTOIAM2009]

Thanks a lot.

Fernando.